1 Channel AC DC 12V RF Wireless Remote Control Switch Receiver +Transmitter NG4S
100% Brand new and high quality.
Lightweight and portable
Easy to install and use.
Remote:
Channels/buttons: 2
Battery included: 12V 23A
Frequency: 315MHz
Operating Current: 30mA
Distance: 20-200M (please note that is the ideal distance without any block and signal interference, it would rise and fall about 10%-50% with interference).
Size: 50 x 40 x 13mm approx. (plus key ring)
Weight: 23g
Receiver:
Channels/switches: 1
Power: DC 24V
Static current: ≤ 6mA
Contact current: 12A 125VAC / 12A 28VDC / 7A 240VAC
Dimensions: 79×38×22mm
Weight: 38g
Operating temperature: -30 ~ +70 degree
Add extra remotes by pressing the learning button inside the receiver, then pressing a button on the remote. In 20s the receiver light will switch off when the remote is recognized.
The control type can be changed inside the receiver by moving the jumper to pin 1&2 (toggle), only 1 pin (momentary) or pins 2&3 (latch).
Latch type: Press one button on the remote, the switch is on till you press the other button to turn off.
Toggle type: Press one button, the switch is on until you press it again. Just like the power key of TV remote control: when you press it, TV on, press again, TV off.
Momentary type: Press one button, the relay is on until you release it. Just like the button of Klaxon, if you press it, Klaxon on, and will turn off once you release it.
These units can be used for starting and stopping, or the connection and break of devices and electrical machinery. The product could also achieve the requirements of various kinds of special control procedures.
Ideal use in:
Vehicle central locking systems
Garage doors
Electronic gates
TV, Motors, Fans, Cameras, Video Signals, Audio Signals, RC applications, Electric Doors/ Locks/ Windows/ Curtains and more
Each device connected will need to be powered by its own power source (there is no voltage output from the switch, it only acts as a connecter/dis-connecter for an existing live circuit).
If using a 24v device it can be wired in parallel with the switch power supply.
How to Use:
1) Output mode selection and learning methods: press to be any key on the remote control, the indicator will flash continuously learn otherwise, the controller can not learn this remote control. First select output relearn remote control.
2) Output mode selection: study has been pressing the button and hold for two seconds after learning indicator lights, another four seconds, learn indicator light changed from off (actually this step is clear operation). Continue pressing the button to learn, after two seconds, the light will flash once; after another two seconds, blinks twice; flashes three times after another two seconds. In the study of learning and blinks once after the release button, the output mode to jog mode; the indicator flashes twice after release button to learn, the output is self-locking mode; the indicator flashes three times after release the button to learn , the output is interlocked manner.
3) learning methods: Press and hold the button to les of remote control, repeat step 3 can be paired learning.
4) Clear Learning Code: study has been pressing the button and hold for two seconds after learning indicator lights, another four seconds, the learning will light changed out, that cleared successfully. Cleared before the paired remote no longer works.arn, after two seconds, the light turns on, release the button to learn, either by pressing a button on the remote control to learn, learn indicator will blink three times to indicate success in learning. The memory control up to 16 different remote control codes, covering the first 17 times the memory of the remote control. The same type of remote control, remote control and the other can be the first series of the same code, you can control, can be arbitrary with multiple; different type
1X Remote Control Switch Receiver (battery included)
1X Transmitter
New High Quality 10secs 10s Sound Voice Audio Recordable Recorder Module Chip for Card NG4SUS $ 1.84/piece 
High Quality DC to DC Converter Regulator 12V to 5V 3A 15W Car Led Display Power Supply NG4SUS $ 2.08/piece 
High Quality LM2596S DC-DC Constant Current and Voltage Adjustable Module LED Driver NG4SUS $ 2.04/piece 
New High Quality 12W LED Driver Power Supply Transformer for LED Strip Lights DC 12V 1A NG4SUS $ 3.63/piece 
High Quality Battery Box Holder Batteries Case for 4x 18650 in Parallel 3.7V Pole Black NG4SUS $ 1.71/piece 
New High Quality YB26VA Red Blue LED Digital Voltmeter Ammeter Dual Display 3.2-10V Volt Amp NG4SUS $ 8.06/piece 
2014 High Quality New Plug in Programable Timer Swich 24h 7 Day Week Digital LCD Display EU NG4SUS $ 12.15/piece 
High Quality Pen Type Mini Infrared Thermometer IR Temperature Measuring LCD Display NG4SUS $ 5.86/piece 
1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season.
6. If you have not received your orderafter 30 days from payment, please contact us. We will trace your order and get back to you asap. Our goal is customer satisfaction!
7. Delivery Time:
1. You have 7 days to contact us and 30 days to return it from the date received. If the item is in your possession more than 7 days, it will be considered used and WE WILL NOT ISSUEA REFUND OR REPLACEMENT to you. There are NO EXCEPTIONS!
Shipping cost is bear by both seller and buyer in half.
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
4. We will bear all the shipping cost if the product(s) is (are) not as advertised. 
1. 12 months Manufacturer’s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN
EXPIRED WARRANTY.
You agree to all of the above-listed policies upon ordering on aliexpress! 
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can perform up your satisfaction.
It is impossible to address issues if we do not know about them!
