|
DJI Phantom 2 GPS Smart Drone Quadcopter with H3-3D Camera Gimbal RTF 2.4GHz
   
|
| |
| |
| |
CREATE ASTONISHING AERIALS
The Phantom 2 is unbelievably easy to fly. Combined with smooth, stabilised footage from the H3-3D gimbal, aerial cinematography and videography has never been easier. It’s light, rugged and perfect for travel.
Requires Zenmuse H3-3D, video downlink and monitor. |
REAL FLIGHT AT YOUR FINGERTIPS
See what the camera sees and lose yourself in picture quality so good it will feel like you’re in the sky yourself.
Requires DJI Lightbridge, iOSD mini or iOSD MK II, video downlink and monitor. |
 |
DJI LIGHTBRIDGE SOLUTION(not include)
The DJI Lightbridge 2.4G full HD digital video downlink features a native OSD system that needs no additional equipment, for an all-in-one FPV experience.Once connected, you can control your flight controller through its built-in 2.4G remote control link or DJI 5.8G remote control. |
| |
DJI IOSD SOLUTION(not include)
Install an iOSD MK II or iOSD mini to see the real-time flight data. |
 |
UNBELIEVABLE INTELLIGENCE
Program your flight path from an iPad with the 16 waypoint Ground Station system, to shoot with more precision than ever. (Requires DJI 2.4G Bluetooth(R) datalink.) |
| ALL-IN-ONE NEW DESIGN |
 |
INTELLIGENT, LONG LASTING BATTERY
The high capacity, high performance 5200mAh Lithium Polymer battery offers up to 25 minutes of flight time. Built in intelligence provides battery capacity data, over charge/discharge protection, as well as maintenance reminders making the battery extremely safe and reliable. |
|
| |
1KM RELIABLE REMOTE CONTROL
Simple, practical and equipped with spring centered sticks that center when released for automatic hovering. |
| |
EASY BATTERY REPLACEMENT
Integrated battery compartment allows battery changes in a matter of seconds. |
| SELF TIGHTENING PROPELLERS |
|
PRECISION FLIGHT AND STABLE HOVERING
Integrated GPS auto-pilot system offers position holding, altitude lock and stable hovering allows attention to be focused on shooting. |
|
| |
AUTO RETURN-TO-HOME /ONE-KEY GO-HOME
If the Phantom 2 and its controller disconnects during flight, the system’s failsafe protection will come to the rescue and if the signal is good enough, the Phantom 2 will return to home and land automatically.
You can also program a One Key Go Home function through the Assistant software. |
NO FLY ZONES FEATURE
In order to increase flight safety and prevent accidental flights in restricted areas, the new firmware for the Phantom 2 series includes a No Fly Zone feature. |
|
| General Features
•Ready to Fly, Multifunctional Quad-rotor System
•Customized H3-2D and H3-3D Gimbal Support
•Precision Flight and Stable Hovering
•25min Flight Time & Intelligent Battery
•Auto Return-to-Home & Landing
•Advanced Power Management
•Intelligent Orientation Control (IOC)
•Easy Battery Replacement
•Self-tightening Propeller
•Video Downlink Support
•CAN-Bus Expansion Module |
Specification:
| Aircraft |
PHANTOM 2 Weight (W Battery) |
1000g |
| Hover Accuracy (Ready To Fly) |
Vertical: 0.8m;
Horizontal: 2.5m |
| Max Yaw Angular Velocity |
200°/s |
| Max Tilt Angle |
35° |
| Max Ascent / Descent Speed |
6m/s |
| Max Flight Speed |
15m/s(Not Recommended) |
| Diagonal Length |
350mm |
| Power Consumption |
5.6W |
| Flight Time |
25mins |
| Take-Off Weight |
≤1300g |
| Operating Temperature |
-10°C ~ 50°C |
| Supported Battery |
DJI Intelligent Battery |
| DJI Intelligent Battery |
Type |
3S LiPo |
| Capacity |
5200mAh, 11.1V |
| Charging Environment Range |
0 to 40 |
| Discharging Environment Range |
-20 to 50 |
| 2.4GHz Remote Control |
Operating Frequency |
2.4GHz ISM |
| Communication Distance (Open Area) |
1000m |
| Receiver Sensitivity (1%PER) |
-97dBm |
| Working Current/Voltage |
100 mA@6V |
| Battery |
4 AA Batteries |
|
| Includes:
•1 * Pre-assembled Phantom 2 Drone(without camera)
•1 * H3-3D Camera Gimbal
•1 * 2.4G Remote controller
•1 * 11.1V 5200mah Battery Cartridge
•1 * 4pcs Propellers
•1 * Extra 4pcs Propellers
•1 * A bag of accessories (4 rubber dampers, 4 tiny landing cushion, small spanner and screws…)
•1 * 100-240V Li-Po Battery Charger (default US wall socket)
•1 * Some Different wall socket adapter (UK, EU, AU)
•1 * USB Cable
•1 * Starter Guide |
