These products are popular, welcome to order!
NOTE:
this item has only 1pcs BPI-M1+ board with antenna, not include any other accessories;
BPI-M1+ Banana Pi M1+ plus A20 Dual Core SOC 1GB RAM on-board WiFi Open-source singel-board computer SBC (beyond Banana Pro)
2dB WiFi Antenna is included
support bananian raspbian raspberry pi debian ubuntu lubuntu kali linux openwrt linux nos linux kano linux opensuse linux fedora linux arch linux Moebius lin
Compare Table:
|
M1 |
M1+ |
M2 |
RasPi 2 |
| CPU |
A20,ARM Cortex-A7 Dual-Core |
A20,ARM Cortex-A7 Dual-Core |
A31S,ARM Cortex-A7 Quad-core |
Broadcom BCM2836 ARMv7 Quad-Core |
| DDR |
1GB DDR3 |
1GB DDR3 |
1GB DDR3 |
1GB RAM |
| PMU |
AXP209 |
AXP209 |
AXP221s |
None |
| Power |
5V @ 2A via MicroUSB |
5V @ 2A via MicroUSB or 40 Pins Header |
5V @ 2A via MicroUSB or 40 Pins Header |
5V @ 1.8A via MicroUSB or 40 Pins Header |
| GPIO |
26 Pins Header,18x GPIO;
8 Pins Header,4x GPIO |
40 Pins Header,28x GPIO |
40 Pins Header,28x GPIO |
40 Pins Header,28x GPIO |
| Wifi Module |
None |
WiFi 802.11 b/g/n (AP 6181 module on board) |
WiFi 802.11 b/g/n (AP 6181 module on board) |
None |
| Ethernet |
10/100/1000Mbps Ethernet |
10/100/1000Mbps Ethernet |
10/100/1000Mbps Ethernet |
10/100Mbps Ethernet |
| On board Storage |
SD card,SATA 2.0 |
MicroSD (TF) card,SATA 2.0 |
MicroSD (TF) card |
MicroSD (TF) card |
| Display |
HDMI;
LVDS/RGB/CPU display interface;
CVBS |
HDMI;
LVDS/RGB/CPU display interface;
CVBS |
HDMI;
LVDS/RGB/CPU display interface; |
HDMI;
MIPI display interface; |
| USB |
2x USB 2.0 host, 1 USB 2.0 OTG |
2x USB 2.0 host, 1 USB 2.0 OTG |
4x USB 2.0 host, 1 USB 2.0 OTG |
4x USB 2.0 host |
| Buttons |
Reset button;
Power button;
U-boot button |
Reset button;
Power button;
U-boot button |
Power button;
U-boot button |
None |
| Leds |
Power status led (red);
User defined led1 (green) |
Power status led (red);
User defined led1 (green) |
Power status led (red);
User defined led1 (green);
User defined led2 (blue) |
Power status led (red);
User defined led1 (green);??? |
What’s the Banana Pi M1+?
Banana PI M1+ is an updated version of Banana Pi M1 (BPI-M1).
Banana Pi M1+ is the open source hardware platform,Banana PI M1+ is an quad core version of Banana Pi ,Banana Pi M1+ is the quad core more better than the Banana Pi M1,it support WIFI onboard.
Banana Pi M1+ series run Android,Debian linux,Ubuntu linux, Raspberry Pi imange and others imange.
Elastos coordinate multi CUP to from the family cloud entirnment which based on the “software/hardware serviceâ€
Banana Pi M1+ hardware: 1Ghz ARM7 dual-core processor, 1GB DDR3 SDRAM,
Banana Pi M1+ with Gigabit ethernet port, It can run with Android 4.4 smoothly. The size of Banana Pi M1+ same as Banana Pi M1, it can easily run with the game it support 1080P high definition video output, the GPIO compatible with Raspberry Pi B+ and can run the ROM Image.
Hardware Specification of Banana PI M1+ (BPI-M1+)
|
|
Soc
|
Allwinner A20
|
|
CPU
|
ARM Cortex-A7 Dual-Core1GHz (ARM v7 instruction set)
|
|
GPU
|
Mali400MP2 Complies with OpenGL ES 2.0/1.1 (hardware acceleration support)
|
|
SDRAM
|
1GB DDR3 (shared with GPU)
|
|
Power
|
5V/2A via MicroUSB (DC in Only) and/or MicroUSB (OTG)
|
|
PMU
|
AXP209
|
Features
|
|
Low-level perpherials
|
40 Pins Header,
28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, CAN, I2S, SPDIF, LRADC, ADC, LINE-IN,FM-IN,HP-IN.
|
|
On board Network
|
10/100/1000Mbps ethernet (Realtek RTL8211E/D)
|
|
Wifi Module
|
WiFi 802.11 b/g/n
|
|
Bluetooth
|
Optional
|
|
On board Storage
|
MicroSD (TF) card,SATA 2.0
|
|
Display
|
Supports multi-channel HD display:
HDMI 1.4 (Type A – full)
LVDS/RGB/CPU display interface (DSI) for raw LCD panels
Composite video (PAL and NTSC) (via 3.5 mm TRRS jack shared with audio out)
11 HDMI resolutions from 640×480 to 1920×1080 plus various PAL and NTSC standards
|
|
Video
|
HD H.264 2160p video decoding
Mutil-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 high profile 1080p@30fps or 720p@60fps encoding
|
|
Audio outputs
|
HDMI,analog audio (via 3.5 mm TRRS jack shared with composite video out),I2S audio (also potentially for audio input)
|
|
Camera
|
Parallel 8-bit camera interface
|
|
Audio input
|
On board micphone
|
|
USB
|
2 USB 2.0 host, 1 USB 2.0 OTG (all direct from A20 chip)
|
| Buttons |
Reset button
Power button
U-boot button
|
|
Leds
|
Power status led (red)
User defined led1 (green)
User defined led2 (blue)
|
|
Other
|
IR reciever
|
Interface definition
|
|
Sizes
|
92 mm × 60mm
|
|
Weight
|
45g
|
Average Star Rating:
0 out of 5 (0 Ratings)
Feedback Rating for This Product
| Positive (0%) |
5 Stars (0)
|
|
4 Stars (0)
|
|
3 Stars (0)
|
| Neutral (0%) |
2 Stars (0)
|
|
1 Star (0)
|
| Shipping Company |
Shipping Cost |
Estimated Delivery Time |
 |
|
3 - 7 days |
 |
|
3 - 7 days |
 |
|
5 - 14 days |
| Post Air Mail |
Free Shipping |
15 - 45 days |
| Return Policy |
If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion. |
| Seller Service |
On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe). |
