pls let us know your choose, when you order, pls note which kinds do you need.
1:Lovely bowknot size: 7 * 12 cm
2:Beard rearview mirror size: 8 * 11 cm
3:Bow tank stick size: 9 * 11 cm(red, white)
4:The handle stick single size: 2 * 12 cm
5:Love size: 5 * 8 cm
To get the stickers, please clear about its structure, consists of three layers (packaging is not of course), transfer film, stickers, PVC bottom.Uncovered the transfer film, stickers should be stick on the transfer film, stickers have glue on the back of mucous membrane.
Caption:
A small car, with transparent transfer film paste paste method (dry stick method) :
Tools: cloth, scraper, or credit card
1, clean body, keep dry.
2, determine the position of the good need to stick.In general, slowly put on one side, while using tools, leveling come paper.
3, if there was little graphics, also can put the transparent transfer film and stickers all ripped down again.But be careful, don’t accident adhesion.
4, good post, then blow pressure several times repeatedly.In addition to the transparent transfer film.
5, in the car door and sewing with box draw a knife knife, inward package and submissive.
6, don’t let the noise of the car and body have any separation or swelled.
Second, with the large sticker paste of transparent transfer film method (wet method) :
Tools: cloth, water vessels, scraper or credit card
1, clean body, will be posted on the body parts of water evenly, in order to reduce the viscosity of sticker position, convenient adjustment.
2, determine the position of the good need to stick.Stick on one side, slowly come as he gently scrape to evenness with tools, paper.
3, meet the handle, or rubbing strip to cut and pack into the material according to their situation.
4, appropriate adjustments, and to determine the correct after graphics in general position, exert oneself to do STH over and over again to water and air bubble.In addition to the transparent transfer film.
5, in the car door and sewing with box draw a knife knife, inward package and submissive.
6, don’t let the noise of the car and body have any separation or swelled.
7, as far as possible let’s dry water in the sticker, conditional can moderate heating drying.According to the weather condition, then wash the car in a day or two.
